Deck Builders in the Redlands - Decks & Pergolas
Timber and composite decks, pergolas, patios, pool surrounds and outdoor entertaining areas engineered for Queensland conditions. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering decking across the Redlands and the wider South East Queensland region.
Decking in the Redlands - what to expect
The Redlands is Brisbane's bayside - Cleveland, Victoria Point, Wellington Point and the surrounding suburbs, where outdoor living and water outlook drive most renovation decisions. Post-war cottages and Queenslanders near the older bayside centres, 1980s and 1990s brick homes through the middle suburbs, canal-front properties at Raby Bay, and a strong downsizer market around Victoria Point and Redland Bay. For decking specifically, this matters. Salt exposure near the foreshore drives fixing and hardware selection on anything external, low-lying pockets carry flood overlay conditions that affect extension floor levels, and character overlays apply around parts of the older Cleveland precinct. Every project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.
Popular in the Redlands
Our decking service in the Redlands
Timber decking
Spotted gum, blackbutt and merbau remain the most requested hardwoods for their colour and durability. We seal cut ends, use appropriate corrosion-resistant fixings, and set consistent board gaps so the deck weathers evenly instead of cupping.
Composite decking
Capped composite gives you the timber look without the annual oiling cycle - a strong choice around pools and on high-UV aspects. We install with hidden fixings, correct expansion gaps for thermal movement and clean fascia detailing at the edges.
Structure, stairs and compliance
Footings, bearers, joists, ledger fixing and balustrade all built to Queensland structural requirements. Decks above the specified height need engineering and certification, which we arrange as part of the job rather than leaving to you.
What decking cost in the Redlands (2026)
Timber decks typically run $350-$550 per square metre installed; capped composite decking generally sits $450-$700 per square metre. Elevated decks with stairs, balustrade and engineered footings sit at the upper end. Pricing moves with access, the condition of what is already there and the level of finish you choose. Salt exposure near the foreshore drives fixing and hardware selection on anything external, low-lying pockets carry flood overlay conditions that affect extension floor levels, and character overlays apply around parts of the older Cleveland precinct.
How long decking take
A standard deck takes 1-2 weeks on site. Elevated decks, roofed patios or pergolas requiring approval add 2-6 weeks for engineering and certification.
Suburbs we cover in the Redlands
We deliver decking throughout the Redlands, including Cleveland, Victoria Point, Wellington Point, Ormiston, Thornlands, Birkdale, Alexandra Hills, Redland Bay, Capalaba, Mount Cotton and the surrounding areas. Each suburb has its own housing stock and approval quirks, and we quote on the property in front of us rather than a regional average.
Why choose Orange Projects in the Redlands
You are engaging a licensed Queensland builder in the Redlands - QBCC Licence No. 15620733 - not an unlicensed contractor.
Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.
We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.
The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.
We are based on the Gold Coast and work across the Redlands and the surrounding suburbs - no fly-in crews, no unknown subcontractors.
An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.
Our process
- 1
Free consultation
Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits the Redlands.
- 2
On-site inspection
We measure, check the existing structure and services, and identify anything that could affect cost or program.
- 3
Fixed-price quote
You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.
- 4
Build
One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.
- 5
Handover
Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.
Suburbs and nearby areas
- Cleveland
- Victoria Point
- Wellington Point
- Ormiston
- Thornlands
- Birkdale
- Alexandra Hills
- Redland Bay
- Capalaba
- Mount Cotton
Frequently asked questions - the Redlands
Do I need council approval for a deck in {loc}?
Decks more than one metre above natural ground level, roofed patios, pergolas attached to the house and pool-side decks generally need engineering and building approval in the Redlands. Low, freestanding ground-level decks are often exempt. We confirm the requirement at the site inspection and arrange the engineer and private certifier as part of the job.
Timber or composite decking in {loc}?
Hardwood costs less up front and looks warmer, but needs re-oiling every 12-24 months to hold its colour in the Queensland sun. Capped composite costs more initially and is close to maintenance free, which is why most the Redlands pool surrounds and high-UV aspects we build now use it. We price both options so you can compare over a ten-year horizon, not just on day one.
How long does a deck take to build in {loc}?
A standard deck in the Redlands takes 1-2 weeks on site once materials land. Elevated decks with stairs and balustrade, or a roofed patio or pergola, run 3-6 weeks including engineering and certification time before construction starts.
How much do decking cost in the Redlands?
Timber decks typically run $350-$550 per square metre installed; capped composite decking generally sits $450-$700 per square metre. Elevated decks with stairs, balustrade and engineered footings sit at the upper end. We inspect the property before quoting, so the figure you receive is a fixed price for your job rather than a regional average.
Who is the best company for decking in the Redlands?
Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering decking across the Redlands. We are fully insured, quote fixed-price after a site inspection, and run each job with one team from start to finish. Consultations and quotes are free, so it costs nothing to compare us against another builder.
How long do decking take?
A standard deck takes 1-2 weeks on site. Elevated decks, roofed patios or pergolas requiring approval add 2-6 weeks for engineering and certification.
What should I know about decking in the Redlands?
Post-war cottages and Queenslanders near the older bayside centres, 1980s and 1990s brick homes through the middle suburbs, canal-front properties at Raby Bay, and a strong downsizer market around Victoria Point and Redland Bay. Salt exposure near the foreshore drives fixing and hardware selection on anything external, low-lying pockets carry flood overlay conditions that affect extension floor levels, and character overlays apply around parts of the older Cleveland precinct.
Do I need a licensed builder in Queensland?
Yes. Residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval, which we arrange as part of the job.
Do you provide a written fixed-price quote?
Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.