Carpenter in Kenmore - Carpentry & Joinery
Structural and finish carpentry - framing, subfloor and stump work, doors, skirtings, architraves, built-in joinery, media walls, feature walls and timber repairs. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering carpentry across Kenmore and the wider Brisbane region.
Carpentry in Kenmore - what to expect
Kenmore is a leafy, established western suburb built largely in the 1970s and 80s, with big blocks and long-term owners. Split-level and low-set brick homes on generous sloping blocks, many with original kitchens, bathrooms and timber decks now well past their service life. For carpentry specifically, this matters. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem. Every Kenmore project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.
Popular in Kenmore
Our carpentry service in Kenmore
Structural carpentry
Wall framing, floor framing, roof carpentry, subfloor repairs, stump replacement and structural timber repairs where rot or termite damage has been found. All work is carried out under our QBCC licence with engineering where required.
Custom joinery and built-ins
Built-in wardrobes, entertainment units, media walls, window seats, mudroom storage, study nooks and bespoke shelving. Made to suit your walls rather than a catalogue module, then finished flush so the joinery reads as part of the architecture.
Finish carpentry
Door hanging, skirtings, architraves, cornice, VJ panelling, battened feature walls, staircases and trim repairs. This is the detail people notice - tight mitres, straight scribes, no gaps and no filler doing the work of a good cut.
What carpentry cost in Kenmore (2026)
Smaller carpentry jobs generally start around $1,500-$5,000. Built-in joinery such as robes, entertainment units and media walls typically runs $4,000-$15,000 depending on size and finish. Prices vary with access, existing condition and the level of finish you choose. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem.
How long carpentry take
Most carpentry jobs are completed in 1-5 days. Larger custom joinery packages run 1-3 weeks including manufacture.
Why choose Orange Projects in Kenmore
You are engaging a licensed Queensland builder in Kenmore - QBCC Licence No. 15620733 - not an unlicensed contractor.
Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.
We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.
The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.
We are based on the Gold Coast and work across Kenmore and the surrounding suburbs - no fly-in crews, no unknown subcontractors.
An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.
Our process
- 1
Free consultation
Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Kenmore.
- 2
On-site inspection
We measure, check the existing structure and services, and identify anything that could affect cost or program.
- 3
Fixed-price quote
You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.
- 4
Build
One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.
- 5
Handover
Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.
Suburbs and nearby areas
- Kenmore
- Chapel Hill
- Fig Tree Pocket
- Brookfield
- Indooroopilly
- Kenmore Hills
Frequently asked questions - Kenmore
Do you take on small carpentry jobs?
Yes. Door hanging, rotten timber repairs, skirtings and architraves, a single built-in robe or a set of shelves are all work we take on in Kenmore, alongside larger structural carpentry and joinery packages. Small jobs are quoted the same way as large ones - inspected first, then a fixed price in writing.
Are you a licensed carpenter or a handyman?
Orange Projects is a QBCC-licensed building company (Licence No. 15620733), not an unlicensed handyman service. In Queensland any building work over $3,300 - including structural carpentry, framing, subfloor and stump repairs - legally requires a licensed contractor, and all of our carpentry in Kenmore is carried out under that licence and covered by insurance.
Can you repair termite or rot damaged timber?
Yes. Replacing damaged bearers, joists, stumps, wall framing, decking and external trim is regular work for us in Kenmore. We open up the affected area, confirm the extent of the damage, replace with treated or hardwood timber to suit the location, and involve an engineer where the member is structural.
How much do carpentry cost in Kenmore?
Smaller carpentry jobs generally start around $1,500-$5,000. Built-in joinery such as robes, entertainment units and media walls typically runs $4,000-$15,000 depending on size and finish. We inspect the property in Kenmore before quoting, so the figure you receive is a fixed price for your job rather than a generic range.
Who does carpentry in Kenmore?
Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering carpentry throughout Kenmore and the surrounding Brisbane area. We are fully insured, quote fixed-price and run each job with one team from start to finish.
How long do carpentry take in Kenmore?
Most carpentry jobs are completed in 1-5 days. Larger custom joinery packages run 1-3 weeks including manufacture.
What makes carpentry different in Kenmore?
Split-level and low-set brick homes on generous sloping blocks, many with original kitchens, bathrooms and timber decks now well past their service life. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem.
Do I need approval or a licensed builder?
In Queensland, residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval. We arrange the certification and documentation as part of the job.
Do you provide a written fixed-price quote?
Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.