Hybrid Flooring in Kenmore
Supply and installation of hybrid plank flooring - fully waterproof, humidity-stable and well suited to South East Queensland homes. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering hybrid flooring across Kenmore and the wider Brisbane region.
Hybrid Flooring in Kenmore - what to expect
Kenmore is a leafy, established western suburb built largely in the 1970s and 80s, with big blocks and long-term owners. Split-level and low-set brick homes on generous sloping blocks, many with original kitchens, bathrooms and timber decks now well past their service life. For hybrid flooring specifically, this matters. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem. Every Kenmore project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.
Popular in Kenmore
Our hybrid flooring service in Kenmore
Substrate preparation
This is what separates a floor that stays flat from one that clicks and lifts. We moisture-test slabs, grind high spots and level low areas before a single plank goes down - the step most quotes quietly leave out.
Installation and acoustics
Acoustic underlay, correct expansion gaps at every perimeter, and considered plank direction to make rooms feel longer and lighter. In apartments we install to the acoustic rating your body corporate requires and provide the documentation.
Trims, transitions and finishing
Scribed cuts at door jambs, tidy transitions into wet areas, and either new skirting or a clean scotia finish. We also handle door undercuts so every door still swings freely over the new floor height.
What hybrid flooring cost in Kenmore (2026)
Hybrid flooring supplied and installed typically runs $75-$120 per square metre, depending on plank quality, underlay, substrate preparation and trim requirements. Prices vary with access, existing condition and the level of finish you choose. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem.
How long hybrid flooring take
Most homes are completed in 2-4 days, plus any substrate grinding or levelling identified during preparation.
Why choose Orange Projects in Kenmore
You are engaging a licensed Queensland builder in Kenmore - QBCC Licence No. 15620733 - not an unlicensed contractor.
Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.
We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.
The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.
We are based on the Gold Coast and work across Kenmore and the surrounding suburbs - no fly-in crews, no unknown subcontractors.
An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.
Our process
- 1
Free consultation
Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Kenmore.
- 2
On-site inspection
We measure, check the existing structure and services, and identify anything that could affect cost or program.
- 3
Fixed-price quote
You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.
- 4
Build
One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.
- 5
Handover
Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.
Suburbs and nearby areas
- Kenmore
- Chapel Hill
- Fig Tree Pocket
- Brookfield
- Indooroopilly
- Kenmore Hills
Frequently asked questions - Kenmore
How much do hybrid flooring cost in Kenmore?
Hybrid flooring supplied and installed typically runs $75-$120 per square metre, depending on plank quality, underlay, substrate preparation and trim requirements. We inspect the property in Kenmore before quoting, so the figure you receive is a fixed price for your job rather than a generic range.
Who does hybrid flooring in Kenmore?
Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering hybrid flooring throughout Kenmore and the surrounding Brisbane area. We are fully insured, quote fixed-price and run each job with one team from start to finish.
How long do hybrid flooring take in Kenmore?
Most homes are completed in 2-4 days, plus any substrate grinding or levelling identified during preparation.
What makes hybrid flooring different in Kenmore?
Split-level and low-set brick homes on generous sloping blocks, many with original kitchens, bathrooms and timber decks now well past their service life. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem.
Do I need approval or a licensed builder?
In Queensland, residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval. We arrange the certification and documentation as part of the job.
Do you provide a written fixed-price quote?
Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.