Timber Framing in New Farm
Structural timber framing - wall, floor and roof framing, load-bearing wall removal and engineered beams, structural openings, subfloor and stump replacement, and termite or rot damaged framing repairs. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber framing across New Farm and the wider Brisbane region.
Timber Framing in New Farm - what to expect
New Farm is one of Brisbane's most established inner suburbs, where character housing sits beside modern apartments and renovation standards are high. Pre-war Queenslanders and workers' cottages on narrow lots, interwar walk-up apartments and newer riverside developments. Kitchens, bathrooms, joinery and sympathetic interior renovations dominate. For timber framing specifically, this matters. Much of New Farm falls under Brisbane's traditional building character overlay, which affects what you can change to the front of a pre-1947 home. We plan around the overlay and coordinate the certifier from the outset. Every New Farm project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.
Popular in New Farm
- All timber framing services
- Renovations in New Farm
- Kitchen Renovations New Farm
- Carpentry New Farm
- Decking New Farm
- Garage Conversions New Farm
- Insurance Repairs New Farm
- Builders New Farm
- Handyman New Farm
- Door Installation New Farm
- Timber Cladding New Farm
- Skirting & Architraves New Farm
- Commercial Carpentry New Farm
- Commercial Builders New Farm
- All Brisbane locations
Our timber framing service in New Farm
Structural openings and beams
Opening a kitchen into living is the most requested structural change we quote. Done properly it means confirming what the wall carries, an engineer sizing the beam and supports, temporary propping, the beam and posts taken down to adequate footings, and certification at completion - all carried out under our QBCC licence.
Subfloor, bearers, joists and stumps
Older homes commonly hide their worst problems under the floor: sagging bearers, damaged joists, rotted stumps and floors that slope. We inspect, map the damage and replace what needs replacing with treated hardwood or steel before relevelling. On a character home this is almost always the job that has to come before any cosmetic renovation.
Framing for decks, extensions and build-unders
Elevated decks, patios, build-under conversions and new rooms all carry engineering, wind-rating and tie-down requirements in South East Queensland, and coastal areas sit in higher wind regions than inland ones. We frame to the engineered drawings and book frame-stage inspections so certification is straightforward.
What timber framing cost in New Farm (2026)
Small structural repairs generally start around $3,000-$8,000. Beam installations with engineering and certification typically run $6,000-$20,000, and full subfloor rebuilds or restumping $10,000-$35,000. Prices vary with access, existing condition and the level of finish you choose. Much of New Farm falls under Brisbane's traditional building character overlay, which affects what you can change to the front of a pre-1947 home. We plan around the overlay and coordinate the certifier from the outset.
How long timber framing take
Small structural repairs take 2-5 days. Beam installations usually run 1-2 weeks. Subfloor rebuilds, restumping and build-under framing generally take 3-6 weeks.
Why choose Orange Projects in New Farm
You are engaging a licensed Queensland builder in New Farm - QBCC Licence No. 15620733 - not an unlicensed contractor.
Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.
We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.
The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.
We are based on the Gold Coast and work across New Farm and the surrounding suburbs - no fly-in crews, no unknown subcontractors.
An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.
Our process
- 1
Free consultation
Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits New Farm.
- 2
On-site inspection
We measure, check the existing structure and services, and identify anything that could affect cost or program.
- 3
Fixed-price quote
You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.
- 4
Build
One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.
- 5
Handover
Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.
Suburbs and nearby areas
- New Farm
- Teneriffe
- Fortitude Valley
- Newstead
- Bulimba
- Hamilton
Frequently asked questions - New Farm
How much does it cost to remove a load-bearing wall?
In New Farm, removing a load-bearing wall and installing an engineered beam typically costs $6,000-$20,000 including engineering, propping, the beam, posts, footings, patching and certification. Long spans, upper-floor loads and steel beams needing craneage sit above that range.
Can you repair termite or rot damaged framing?
Yes, and it is regular work in New Farm. We open up the affected area to find the true extent - almost always larger than what is visible - replace the damaged studs, plates, bearers or joists, address the moisture source, and work alongside a licensed pest manager where termites are involved.
Do you do restumping and subfloor repairs?
Yes. Sagging bearers, borer or termite damaged joists, rotted timber stumps and sloping floors are common in the older cottages and Queenslanders around New Farm. We inspect the subfloor, map the damage, replace with treated hardwood or steel and relevel the floor.
How much do timber framing cost in New Farm?
Small structural repairs generally start around $3,000-$8,000. Beam installations with engineering and certification typically run $6,000-$20,000, and full subfloor rebuilds or restumping $10,000-$35,000. We inspect the property in New Farm before quoting, so the figure you receive is a fixed price for your job rather than a generic range.
Who does timber framing in New Farm?
Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber framing throughout New Farm and the surrounding Brisbane area. We are fully insured, quote fixed-price and run each job with one team from start to finish.
How long do timber framing take in New Farm?
Small structural repairs take 2-5 days. Beam installations usually run 1-2 weeks. Subfloor rebuilds, restumping and build-under framing generally take 3-6 weeks.
What makes timber framing different in New Farm?
Pre-war Queenslanders and workers' cottages on narrow lots, interwar walk-up apartments and newer riverside developments. Kitchens, bathrooms, joinery and sympathetic interior renovations dominate. Much of New Farm falls under Brisbane's traditional building character overlay, which affects what you can change to the front of a pre-1947 home. We plan around the overlay and coordinate the certifier from the outset.
Do I need approval or a licensed builder?
In Queensland, residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval. We arrange the certification and documentation as part of the job.
Do you provide a written fixed-price quote?
Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.