Orange Projects - Renovations & Carpentry
Norman Park

Timber Framing in Norman Park

Structural timber framing - wall, floor and roof framing, load-bearing wall removal and engineered beams, structural openings, subfloor and stump replacement, and termite or rot damaged framing repairs. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber framing across Norman Park and the wider Brisbane region.

Get a free quote Book a free site visit 0421 326 743

Timber Framing in Norman Park - what to expect

Norman Park is a small, well-located inner-east suburb between Bulimba and Coorparoo, with a mix of character housing and newer infill. Queenslanders and post-war timber homes on sloping blocks, plus modern townhouses. Rear extensions, under-house conversions, kitchens and bathrooms are the recurring scopes. For timber framing specifically, this matters. Narrow lots and neighbouring homes close to boundaries make scaffolding and access planning essential. Character overlay may apply to pre-1947 street-facing elevations. Every Norman Park project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.

Popular in Norman Park

Our timber framing service in Norman Park

Structural openings and beams

Opening a kitchen into living is the most requested structural change we quote. Done properly it means confirming what the wall carries, an engineer sizing the beam and supports, temporary propping, the beam and posts taken down to adequate footings, and certification at completion - all carried out under our QBCC licence.

Subfloor, bearers, joists and stumps

Older homes commonly hide their worst problems under the floor: sagging bearers, damaged joists, rotted stumps and floors that slope. We inspect, map the damage and replace what needs replacing with treated hardwood or steel before relevelling. On a character home this is almost always the job that has to come before any cosmetic renovation.

Framing for decks, extensions and build-unders

Elevated decks, patios, build-under conversions and new rooms all carry engineering, wind-rating and tie-down requirements in South East Queensland, and coastal areas sit in higher wind regions than inland ones. We frame to the engineered drawings and book frame-stage inspections so certification is straightforward.

What timber framing cost in Norman Park (2026)

Small structural repairs generally start around $3,000-$8,000. Beam installations with engineering and certification typically run $6,000-$20,000, and full subfloor rebuilds or restumping $10,000-$35,000. Prices vary with access, existing condition and the level of finish you choose. Narrow lots and neighbouring homes close to boundaries make scaffolding and access planning essential. Character overlay may apply to pre-1947 street-facing elevations.

How long timber framing take

Small structural repairs take 2-5 days. Beam installations usually run 1-2 weeks. Subfloor rebuilds, restumping and build-under framing generally take 3-6 weeks.

Why choose Orange Projects in Norman Park

QBCC licensed

You are engaging a licensed Queensland builder in Norman Park - QBCC Licence No. 15620733 - not an unlicensed contractor.

Fully insured

Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.

Fixed-price quotes

We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.

One team, start to finish

The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.

Local to South East Queensland

We are based on the Gold Coast and work across Norman Park and the surrounding suburbs - no fly-in crews, no unknown subcontractors.

Clear communication

An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.

Our process

  1. 1

    Free consultation

    Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Norman Park.

  2. 2

    On-site inspection

    We measure, check the existing structure and services, and identify anything that could affect cost or program.

  3. 3

    Fixed-price quote

    You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.

  4. 4

    Build

    One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.

  5. 5

    Handover

    Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.

Suburbs and nearby areas

Frequently asked questions - Norman Park

How much does it cost to remove a load-bearing wall?

In Norman Park, removing a load-bearing wall and installing an engineered beam typically costs $6,000-$20,000 including engineering, propping, the beam, posts, footings, patching and certification. Long spans, upper-floor loads and steel beams needing craneage sit above that range.

Can you repair termite or rot damaged framing?

Yes, and it is regular work in Norman Park. We open up the affected area to find the true extent - almost always larger than what is visible - replace the damaged studs, plates, bearers or joists, address the moisture source, and work alongside a licensed pest manager where termites are involved.

Do you do restumping and subfloor repairs?

Yes. Sagging bearers, borer or termite damaged joists, rotted timber stumps and sloping floors are common in the older cottages and Queenslanders around Norman Park. We inspect the subfloor, map the damage, replace with treated hardwood or steel and relevel the floor.

How much do timber framing cost in Norman Park?

Small structural repairs generally start around $3,000-$8,000. Beam installations with engineering and certification typically run $6,000-$20,000, and full subfloor rebuilds or restumping $10,000-$35,000. We inspect the property in Norman Park before quoting, so the figure you receive is a fixed price for your job rather than a generic range.

Who does timber framing in Norman Park?

Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber framing throughout Norman Park and the surrounding Brisbane area. We are fully insured, quote fixed-price and run each job with one team from start to finish.

How long do timber framing take in Norman Park?

Small structural repairs take 2-5 days. Beam installations usually run 1-2 weeks. Subfloor rebuilds, restumping and build-under framing generally take 3-6 weeks.

What makes timber framing different in Norman Park?

Queenslanders and post-war timber homes on sloping blocks, plus modern townhouses. Rear extensions, under-house conversions, kitchens and bathrooms are the recurring scopes. Narrow lots and neighbouring homes close to boundaries make scaffolding and access planning essential. Character overlay may apply to pre-1947 street-facing elevations.

Do I need approval or a licensed builder?

In Queensland, residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval. We arrange the certification and documentation as part of the job.

Do you provide a written fixed-price quote?

Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.