Timber Rot & Termite Repairs in Sherwood
Rot and termite damaged timber repairs - bearers, joists, stumps, wall framing, deck frames and boards, fascia, barge boards, window sills, external trim and door jambs, with the moisture source fixed as part of the repair. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber repairs across Sherwood and the wider Brisbane region.
Timber Repairs in Sherwood - what to expect
Sherwood is a quiet, leafy western suburb with wide streets, established trees and a strong stock of character homes. Pre-war Queenslanders and interwar homes on large blocks, plus post-war houses closer to the rail line. Kitchens, bathrooms, timber flooring restoration and rear extensions are typical. For timber repairs specifically, this matters. Parts of Sherwood near the river carry flood overlay conditions. Where that applies we specify resilient materials, appropriate floor levels and cabinetry substrates that will survive an inundation event. Every Sherwood project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.
Popular in Sherwood
- All timber repairs services
- Renovations in Sherwood
- Home Renovations Sherwood
- Hybrid Flooring Sherwood
- Kitchen Renovations Sherwood
- Carpentry Sherwood
- Decking Sherwood
- Garage Conversions Sherwood
- Insurance Repairs Sherwood
- Builders Sherwood
- Handyman Sherwood
- Pergolas Sherwood
- Door Installation Sherwood
- Timber Cladding Sherwood
- Timber Framing Sherwood
- Skirting & Architraves Sherwood
- Commercial Carpentry Sherwood
- Commercial Builders Sherwood
- Timber Repairs Graceville
- Timber Repairs Indooroopilly
- All Brisbane locations
Our timber repairs service in Sherwood
Finding the real extent of the damage
Visible damage is almost always the smallest part of the problem. We open up linings, lift boards and probe adjacent members so the quote covers the actual damaged area rather than stopping at the first sound timber and leaving you with a variation halfway through.
Structural repairs done under licence
Bearers, joists, stumps, wall plates and studs are structural. Replacement uses treated pine or hardwood to suit the exposure, with correct bearing, fixings and propping, and an engineer involved where the member is carrying load. This is licensed building work, not handyman work.
Fixing the cause, not just the timber
Timber does not rot without a water source. Failed flashings, blocked deck drainage, ground clearance, leaking shower walls, unsealed end grain and poor subfloor ventilation are the usual culprits. We correct the cause as part of the repair so the new timber lasts as long as it should.
What timber repairs cost in Sherwood (2026)
Small localised repairs such as a rotted sill, jamb or a few deck boards generally run $600-$2,500. Deck frame and fascia repairs typically run $3,000-$9,000, and structural subfloor or wall framing replacement $6,000-$25,000 depending on extent and access. Prices vary with access, existing condition and the level of finish you choose. Parts of Sherwood near the river carry flood overlay conditions. Where that applies we specify resilient materials, appropriate floor levels and cabinetry substrates that will survive an inundation event.
How long timber repairs take
Localised repairs are usually completed in 1-2 days. Deck frame and fascia works run 3-7 days, and structural subfloor or framing replacement 1-3 weeks.
Why choose Orange Projects in Sherwood
You are engaging a licensed Queensland builder in Sherwood - QBCC Licence No. 15620733 - not an unlicensed contractor.
Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.
We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.
The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.
We are based on the Gold Coast and work across Sherwood and the surrounding suburbs - no fly-in crews, no unknown subcontractors.
An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.
Our process
- 1
Free consultation
Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Sherwood.
- 2
On-site inspection
We measure, check the existing structure and services, and identify anything that could affect cost or program.
- 3
Fixed-price quote
You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.
- 4
Build
One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.
- 5
Handover
Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.
Suburbs and nearby areas
- Sherwood
- Graceville
- Corinda
- Chelmer
- Oxley
- Indooroopilly
Frequently asked questions - Sherwood
How do I know if timber damage is rot or termites?
Rot in Sherwood usually shows up as soft, dark, spongy timber around wet areas, deck edges, window sills and subfloors where water sits. Termite damage tends to be hollow-sounding with the surface intact, sometimes with mud tunnelling behind it. We probe and open up the affected area so you know exactly which one you are dealing with before anything is quoted.
Do you work with a pest controller?
Yes. Where termites are active in a Sherwood home the colony has to be treated by a licensed pest manager before we replace timber, otherwise the new work becomes the next meal. We coordinate the sequence so treatment happens first and repairs follow.
Can rotten deck and window timbers be repaired rather than replaced?
Sometimes. Isolated surface rot in a hardwood member can be cut out and spliced, but anything structural or more than superficial gets replaced. In Sherwood's humidity, patching over damaged timber with filler is a short-term fix that hides a growing problem.
How much do timber repairs cost in Sherwood?
Small localised repairs such as a rotted sill, jamb or a few deck boards generally run $600-$2,500. Deck frame and fascia repairs typically run $3,000-$9,000, and structural subfloor or wall framing replacement $6,000-$25,000 depending on extent and access. We inspect the property in Sherwood before quoting, so the figure you receive is a fixed price for your job rather than a generic range.
Who does timber repairs in Sherwood?
Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber repairs throughout Sherwood and the surrounding Brisbane area. We are fully insured, quote fixed-price and run each job with one team from start to finish.
How long do timber repairs take in Sherwood?
Localised repairs are usually completed in 1-2 days. Deck frame and fascia works run 3-7 days, and structural subfloor or framing replacement 1-3 weeks.
What makes timber repairs different in Sherwood?
Pre-war Queenslanders and interwar homes on large blocks, plus post-war houses closer to the rail line. Kitchens, bathrooms, timber flooring restoration and rear extensions are typical. Parts of Sherwood near the river carry flood overlay conditions. Where that applies we specify resilient materials, appropriate floor levels and cabinetry substrates that will survive an inundation event.
Do I need approval or a licensed builder?
In Queensland, residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval. We arrange the certification and documentation as part of the job.
Do you provide a written fixed-price quote?
Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.