Timber Rot & Termite Repairs in Wilston
Rot and termite damaged timber repairs - bearers, joists, stumps, wall framing, deck frames and boards, fascia, barge boards, window sills, external trim and door jambs, with the moisture source fixed as part of the repair. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber repairs across Wilston and the wider Brisbane region.
Timber Repairs in Wilston - what to expect
Wilston is a compact inner-north character suburb where nearly every home is a Queenslander at some stage of renovation. Pre-war Queenslanders on sloping blocks, many raised and built in underneath to add bedrooms, bathrooms and rumpus space. Kitchens, wet areas and internal reconfigurations follow. For timber repairs specifically, this matters. Raising and building in underneath needs height compliance, engineering, and careful integration with the original floor plan and stair. Narrow side access means most materials come through the front. Every Wilston project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.
Popular in Wilston
- All timber repairs services
- Renovations in Wilston
- Home Renovations Wilston
- Kitchen Renovations Wilston
- Carpentry Wilston
- Decking Wilston
- Garage Conversions Wilston
- Insurance Repairs Wilston
- Builders Wilston
- Handyman Wilston
- Pergolas Wilston
- Door Installation Wilston
- Timber Cladding Wilston
- Timber Framing Wilston
- Skirting & Architraves Wilston
- Commercial Carpentry Wilston
- Commercial Builders Wilston
- Timber Repairs Ashgrove
- All Brisbane locations
Our timber repairs service in Wilston
Finding the real extent of the damage
Visible damage is almost always the smallest part of the problem. We open up linings, lift boards and probe adjacent members so the quote covers the actual damaged area rather than stopping at the first sound timber and leaving you with a variation halfway through.
Structural repairs done under licence
Bearers, joists, stumps, wall plates and studs are structural. Replacement uses treated pine or hardwood to suit the exposure, with correct bearing, fixings and propping, and an engineer involved where the member is carrying load. This is licensed building work, not handyman work.
Fixing the cause, not just the timber
Timber does not rot without a water source. Failed flashings, blocked deck drainage, ground clearance, leaking shower walls, unsealed end grain and poor subfloor ventilation are the usual culprits. We correct the cause as part of the repair so the new timber lasts as long as it should.
What timber repairs cost in Wilston (2026)
Small localised repairs such as a rotted sill, jamb or a few deck boards generally run $600-$2,500. Deck frame and fascia repairs typically run $3,000-$9,000, and structural subfloor or wall framing replacement $6,000-$25,000 depending on extent and access. Prices vary with access, existing condition and the level of finish you choose. Raising and building in underneath needs height compliance, engineering, and careful integration with the original floor plan and stair. Narrow side access means most materials come through the front.
How long timber repairs take
Localised repairs are usually completed in 1-2 days. Deck frame and fascia works run 3-7 days, and structural subfloor or framing replacement 1-3 weeks.
Why choose Orange Projects in Wilston
You are engaging a licensed Queensland builder in Wilston - QBCC Licence No. 15620733 - not an unlicensed contractor.
Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.
We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.
The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.
We are based on the Gold Coast and work across Wilston and the surrounding suburbs - no fly-in crews, no unknown subcontractors.
An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.
Our process
- 1
Free consultation
Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Wilston.
- 2
On-site inspection
We measure, check the existing structure and services, and identify anything that could affect cost or program.
- 3
Fixed-price quote
You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.
- 4
Build
One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.
- 5
Handover
Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.
Suburbs and nearby areas
Frequently asked questions - Wilston
How do I know if timber damage is rot or termites?
Rot in Wilston usually shows up as soft, dark, spongy timber around wet areas, deck edges, window sills and subfloors where water sits. Termite damage tends to be hollow-sounding with the surface intact, sometimes with mud tunnelling behind it. We probe and open up the affected area so you know exactly which one you are dealing with before anything is quoted.
Do you work with a pest controller?
Yes. Where termites are active in a Wilston home the colony has to be treated by a licensed pest manager before we replace timber, otherwise the new work becomes the next meal. We coordinate the sequence so treatment happens first and repairs follow.
Can rotten deck and window timbers be repaired rather than replaced?
Sometimes. Isolated surface rot in a hardwood member can be cut out and spliced, but anything structural or more than superficial gets replaced. In Wilston's humidity, patching over damaged timber with filler is a short-term fix that hides a growing problem.
How much do timber repairs cost in Wilston?
Small localised repairs such as a rotted sill, jamb or a few deck boards generally run $600-$2,500. Deck frame and fascia repairs typically run $3,000-$9,000, and structural subfloor or wall framing replacement $6,000-$25,000 depending on extent and access. We inspect the property in Wilston before quoting, so the figure you receive is a fixed price for your job rather than a generic range.
Who does timber repairs in Wilston?
Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber repairs throughout Wilston and the surrounding Brisbane area. We are fully insured, quote fixed-price and run each job with one team from start to finish.
How long do timber repairs take in Wilston?
Localised repairs are usually completed in 1-2 days. Deck frame and fascia works run 3-7 days, and structural subfloor or framing replacement 1-3 weeks.
What makes timber repairs different in Wilston?
Pre-war Queenslanders on sloping blocks, many raised and built in underneath to add bedrooms, bathrooms and rumpus space. Kitchens, wet areas and internal reconfigurations follow. Raising and building in underneath needs height compliance, engineering, and careful integration with the original floor plan and stair. Narrow side access means most materials come through the front.
Do I need approval or a licensed builder?
In Queensland, residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval. We arrange the certification and documentation as part of the job.
Do you provide a written fixed-price quote?
Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.