Door Installation in Kenmore
Internal and external door installation, replacement and rehanging - solid core and solid timber doors, entry doors, cavity sliders, bifolds and stackers, plus frames, jambs and hardware. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering door installation across Kenmore and the wider Brisbane region.
Door Installation in Kenmore - what to expect
Kenmore is a leafy, established western suburb built largely in the 1970s and 80s, with big blocks and long-term owners. Split-level and low-set brick homes on generous sloping blocks, many with original kitchens, bathrooms and timber decks now well past their service life. For door installation specifically, this matters. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem. Every Kenmore project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.
Popular in Kenmore
- All door installation services
- Renovations in Kenmore
- Decking Kenmore
- Kitchen Renovations Kenmore
- Hybrid Flooring Kenmore
- Carpentry Kenmore
- Garage Conversions Kenmore
- Insurance Repairs Kenmore
- Builders Kenmore
- Handyman Kenmore
- Pergolas Kenmore
- Timber Cladding Kenmore
- Timber Framing Kenmore
- Skirting & Architraves Kenmore
- Timber Repairs Kenmore
- Commercial Carpentry Kenmore
- Commercial Builders Kenmore
- Door Installation Indooroopilly
- All Brisbane locations
Our door installation service in Kenmore
Internal door replacement
Swapping hollow-core doors for solid-core changes how a house feels immediately - weight in the hand, a solid close instead of a rattle, and noticeably better acoustics between bedrooms, studies and living areas. Paired with new lever hardware and quality hinges it is one of the cheapest quality upgrades in any renovation.
Entry doors in a coastal climate
Entry doors here deal with UV, driving rain and salt air. Timber doors must be sealed on all six faces including the top and bottom edges, hardware needs a quality marine-grade or PVD finish rather than budget chrome, and weather seals and thresholds have to actually stop wind-driven rain, not just look tidy.
New openings, sliders and hardware
Framing a new door opening means a correctly sized lintel, jamb studs, patched linings and matching trim - and an engineer where the wall is load-bearing. We also install cavity sliders, barn doors, bifolds and stackers, and upgrade locks, closers and lever sets throughout a home.
What door installation cost in Kenmore (2026)
Hanging a door into an existing frame typically costs $180-$350. A solid-core internal door supplied and hung runs $450-$900, solid timber $800-$1,400, and an external entry door $1,200-$4,500 installed. Prices vary with access, existing condition and the level of finish you choose. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem.
How long door installation take
A single door is usually a couple of hours. Replacing all internal doors through a four-bedroom home generally takes 2-3 days.
Why choose Orange Projects in Kenmore
You are engaging a licensed Queensland builder in Kenmore - QBCC Licence No. 15620733 - not an unlicensed contractor.
Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.
We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.
The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.
We are based on the Gold Coast and work across Kenmore and the surrounding suburbs - no fly-in crews, no unknown subcontractors.
An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.
Our process
- 1
Free consultation
Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Kenmore.
- 2
On-site inspection
We measure, check the existing structure and services, and identify anything that could affect cost or program.
- 3
Fixed-price quote
You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.
- 4
Build
One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.
- 5
Handover
Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.
Suburbs and nearby areas
- Kenmore
- Chapel Hill
- Fig Tree Pocket
- Brookfield
- Indooroopilly
- Kenmore Hills
Frequently asked questions - Kenmore
Can you fix a door that sticks or will not latch?
Yes, and it is one of our most common call-outs in Kenmore. Sticking doors are usually a dropped hinge, bowed jamb, swollen door or a strike plate out of position. We diagnose the actual cause on site rather than planing the door, because a planed door that swelled in humidity leaves a gap once it dries out.
Do you supply the doors or can I supply my own?
Either works. We can supply doors and hardware through our trade suppliers, usually below retail, or install doors you have already bought for your Kenmore home. If you are supplying, send us the sizes and hardware details first so we can confirm they suit the openings.
Can you install a cavity slider into an existing wall?
Usually yes. In Kenmore homes we check the wall for studs, wiring, plumbing and load-bearing conditions first, then frame the cavity, install the unit plumb, patch the linings and match your existing skirting and architraves so it does not look like a retrofit.
How much do door installation cost in Kenmore?
Hanging a door into an existing frame typically costs $180-$350. A solid-core internal door supplied and hung runs $450-$900, solid timber $800-$1,400, and an external entry door $1,200-$4,500 installed. We inspect the property in Kenmore before quoting, so the figure you receive is a fixed price for your job rather than a generic range.
Who does door installation in Kenmore?
Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering door installation throughout Kenmore and the surrounding Brisbane area. We are fully insured, quote fixed-price and run each job with one team from start to finish.
How long do door installation take in Kenmore?
A single door is usually a couple of hours. Replacing all internal doors through a four-bedroom home generally takes 2-3 days.
What makes door installation different in Kenmore?
Split-level and low-set brick homes on generous sloping blocks, many with original kitchens, bathrooms and timber decks now well past their service life. Older Kenmore decks frequently fail at the post-to-ground junction and at the ledger connection to the house. We inspect the structure properly and rebuild to current standards rather than resurfacing over a problem.
Do I need approval or a licensed builder?
In Queensland, residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval. We arrange the certification and documentation as part of the job.
Do you provide a written fixed-price quote?
Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.