Hybrid Flooring in Bundall

Our hybrid flooring service in Bundall

Acoustic requirements in apartments in Bundall

Most buildings set a minimum acoustic rating for hard flooring, and hybrid over a bare slab without compliant underlay is the fastest way to a complaint. We check the by-laws, specify underlay that meets the building's rating, and keep the documentation so the installation is defensible if a neighbour raises it later. Nerang River-front homes on the eastern streets, low-rise apartments, and a large commercial precinct along Bundall Road with offices requiring refurbishment, partitioning and joinery.

Substrate preparation

This is what separates a floor that stays flat from one that clicks and lifts. We moisture-test slabs, grind high spots and level low areas before a single plank goes down - the step most quotes quietly leave out.

Installation and acoustics

Acoustic underlay, correct expansion gaps at every perimeter, and considered plank direction to make rooms feel longer and lighter. In apartments we install to the acoustic rating your body corporate requires and provide the documentation.

Trims, transitions and finishing

Scribed cuts at door jambs, tidy transitions into wet areas, and either new skirting or a clean scotia finish. We also handle door undercuts so every door still swings freely over the new floor height.

What hybrid flooring costs in Bundall (2026)

Hybrid flooring supplied and installed typically runs $75-$120 per square metre, depending on plank quality, underlay, substrate preparation and trim requirements. Prices move with access, the condition of what is already there, how much structural work is involved and the level of finish you choose. We confirm all of that at the inspection and price your Bundall job rather than quoting from a range.

Our process

1. 01

   Free consultation

   Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Bundall.

2. 02

   On-site inspection

   We measure, check the existing structure and services, and identify anything that could affect cost or program.

3. 03

   Fixed-price quote

   You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.

4. 04

   Build

   One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.

5. 05

   Handover

   Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.

Frequently asked questions