Cladding in Coomera
External wall cladding installation, replacement and repairs - fibre cement and James Hardie systems, weatherboards, timber and composite cladding, full re-clads, soffits and screening, installed with correct battening, drainage cavity, sarking and flashings. Orange Projects is QBCC licensed (Licence No. 15620733) delivering cladding across Coomera and the wider Gold Coast region.
- QBCC Licensed
- Fully Insured
- Fixed-Price Quotes
- Gold Coast Based
Request a Free Quote
Tell us about the work you're considering and our team will be in touch within 1 business day.
Cladding in Coomera - what to expect
Coomera is a fast-growing northern corridor suburb with a wide range of estate housing.
2000s-onward estate homes, townhouses and older riverside properties.
Upgrading builder-grade finishes delivers the biggest visible improvement in these homes.
Every Coomera project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a QBCC licensed contractor.
Our cladding service in Coomera
Cladding installation
New external cladding for renovations, extensions, alterations and existing homes. We set out the wall system first - wrap, vertical battens, drainage cavity, vermin mesh - then install the boards or panels you have chosen, whether that is fibre cement weatherboard, vertical panel cladding, timber or composite. Getting the setout right is what makes the finished elevation read as straight, even lines rather than a patchwork.
Cladding replacement and re-clads
Removing old, damaged, deteriorated or simply dated external cladding and replacing it with a modern system. This is the single fastest way to change how a house looks from the street, and it is also the point where you get to fix what is behind the wall - insulation, wrap, flashings and any timber that needs attention. We handle removal, disposal, the new install and the trims and flashings that finish it properly.
Fibre cement and James Hardie cladding
Fibre cement is the most common choice on new work here because it handles UV, salt air and driving rain with very little maintenance. We install the widely used James Hardie range - HardiePlank and Linea weatherboards for a classic profile, Axon and Stria for vertical and horizontal panel looks, Matrix for a contemporary expressed-joint facade, and EasyLap where a flat rendered-look sheet is wanted. Other manufacturers are available too, and we will tell you honestly which product suits the wall.
Timber cladding and weatherboards
Timber cladding still looks better than anything imitating it. Shiplap, weatherboard, board and batten and vertical shadowline in spotted gum, blackbutt or cedar, plus timber weatherboard replacement on older homes where matching the existing profile matters. Timber needs recoating every 18-24 months on exposed elevations, so we walk through the maintenance honestly before you commit, and offer composite as the low-upkeep alternative.
Cladding repairs
Repairs to cracked, split, water-damaged or storm-damaged boards, failed joints and flashings, and the carpentry behind them. Where only part of an elevation has failed we can often repair and blend rather than re-clad the whole wall, which keeps the cost down. Where the problem is the original installation - no cavity, no flashings - we will tell you that too.
Timber behind existing cladding
Most re-clads come apart cleanly. Occasionally, once the old cladding is off, some deterioration turns up in framing, battens or trims that nobody could see beforehand. If that happens we stop, photograph and show you exactly what is exposed, and price any rectification before continuing. It is not something to worry about in advance, just something worth knowing can happen so there are no surprises mid-job.
Details that decide whether it lasts
Head flashings over windows, correct sill and apron details, sealed penetrations for taps and lights, adequate ground clearance so boards are not wicking moisture, stainless or hot-dipped galvanised fixings near the coast, and cut edges sealed before fixing. None of it is visible on a finished job and none of it can be fixed later without opening the wall back up.
The wall system behind the boards
A compliant installation is a drained, ventilated cavity: sarking or breathable wrap on the frame, vertical battens creating an air gap, vermin mesh top and bottom, then boards fixed to the battens. Water always gets behind cladding - the cavity is what lets the wall drain and dry. Skipping it is the most common cause of the failed cladding we get called out to in Coomera.
What cladding cost in Coomera (2026)
Installed cladding typically runs $180-$400 per square metre. Fibre cement systems such as HardiePlank, Linea, Axon and Stria sit at the lower to middle of that range, composite in the middle, and hardwood timber cladding toward the upper end. Removal and disposal of existing cladding is quoted separately. Prices vary with access, existing condition and the level of finish you choose. Upgrading builder-grade finishes delivers the biggest visible improvement in these homes.
How long cladding take
A feature entry or single elevation is generally 3-5 days. A full house re-clad usually runs 2-3 weeks including scaffold, removal of the old cladding and flashing works.
Why choose Orange Projects
You are engaging a QBCC licensed Queensland business in Coomera - QBCC Licence No. 15620733 - not an unlicensed contractor.
Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.
We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.
The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.
We are based on the Gold Coast and work across Coomera and the surrounding suburbs - no fly-in crews, no unknown subcontractors.
An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.
Our process
- 01
Free consultation
Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Coomera.
- 02
On-site inspection
We measure, check the existing structure and services, and identify anything that could affect cost or program.
- 03
Fixed-price quote
You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.
- 04
Build
One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.
- 05
Handover
Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.
Areas we cover around Coomera
Frequently asked questions
More services around Coomera
Home improvements
Carpentry
Nearby areas
- Cladding Gold Coast
- Home Renovations Coomera
- Kitchen Renovations Coomera
- Hybrid Flooring Coomera
- Carpentry Coomera
- Ceiling Repair Coomera
- Decking Coomera
- Media Walls Coomera
- Feature Walls Coomera
- Garage Conversions Coomera
- Insurance Repairs Coomera
- Handyman Coomera
- Pergolas Coomera
- Door Installation Coomera
- Timber Framing Coomera
- Skirting & Architraves Coomera
- Commercial Carpentry Coomera
- Cladding Upper Coomera
- Cladding Oxenford
- Cladding Pimpama
- Cladding Hope Island
- Cladding Helensvale
Free quote for cladding in Coomera
Orange Projects is QBCC licensed (No. 15620733) and fully insured. Tell us about your Coomera project and we will inspect the site and send a fixed-price quote in writing. QBCC Licence No. 15620733.
Managing rentals or a commercial portfolio? Create a free property maintenance account.