Cladding in Pimpama

Our cladding service in Pimpama

Cladding installation

New external cladding for renovations, extensions, alterations and existing homes. We set out the wall system first - wrap, vertical battens, drainage cavity, vermin mesh - then install the boards or panels you have chosen, whether that is fibre cement weatherboard, vertical panel cladding, timber or composite. Getting the setout right is what makes the finished elevation read as straight, even lines rather than a patchwork.

Cladding replacement and re-clads

Removing old, damaged, deteriorated or simply dated external cladding and replacing it with a modern system. This is the single fastest way to change how a house looks from the street, and it is also the point where you get to fix what is behind the wall - insulation, wrap, flashings and any timber that needs attention. We handle removal, disposal, the new install and the trims and flashings that finish it properly.

Fibre cement and James Hardie cladding

Fibre cement is the most common choice on new work here because it handles UV, salt air and driving rain with very little maintenance. We install the widely used James Hardie range - HardiePlank and Linea weatherboards for a classic profile, Axon and Stria for vertical and horizontal panel looks, Matrix for a contemporary expressed-joint facade, and EasyLap where a flat rendered-look sheet is wanted. Other manufacturers are available too, and we will tell you honestly which product suits the wall.

Timber cladding and weatherboards

Timber cladding still looks better than anything imitating it. Shiplap, weatherboard, board and batten and vertical shadowline in spotted gum, blackbutt or cedar, plus timber weatherboard replacement on older homes where matching the existing profile matters. Timber needs recoating every 18-24 months on exposed elevations, so we walk through the maintenance honestly before you commit, and offer composite as the low-upkeep alternative.

Cladding repairs

Repairs to cracked, split, water-damaged or storm-damaged boards, failed joints and flashings, and the carpentry behind them. Where only part of an elevation has failed we can often repair and blend rather than re-clad the whole wall, which keeps the cost down. Where the problem is the original installation - no cavity, no flashings - we will tell you that too.

Timber behind existing cladding

Most re-clads come apart cleanly. Occasionally, once the old cladding is off, some deterioration turns up in framing, battens or trims that nobody could see beforehand. If that happens we stop, photograph and show you exactly what is exposed, and price any rectification before continuing. It is not something to worry about in advance, just something worth knowing can happen so there are no surprises mid-job.

Choosing a cladding system for Pimpama

Exposure decides more than taste does. Walls facing west and north in Pimpama take the hardest UV, and anything near open water takes salt as well. Those elevations suit fibre cement or composite with stainless fixings. Sheltered elevations, entries and upper-level features are where timber earns its keep. We look at each wall separately rather than specifying one product for the whole house.

Cladding and the rest of the job in Pimpama

Cladding is often the finishing move on a bigger Pimpama project - an extension, a build-under, a garage conversion or a deck that needs the adjoining wall to match. Because our carpenters handle framing, decking and finishing work as well, cladding lines, deck levels and window trims are set out together instead of three trades each doing their own version.

Access and approvals in Pimpama

New estates come with covenant conditions, small setbacks and tight side access, so anything structural needs to be planned around the fence line and the neighbour. Slabs in this area are generally sound but often need grinding before hybrid flooring goes down.

What cladding costs in Pimpama (2026)

Installed cladding typically runs $180-$400 per square metre. Fibre cement systems such as HardiePlank, Linea, Axon and Stria sit at the lower to middle of that range, composite in the middle, and hardwood timber cladding toward the upper end. Removal and disposal of existing cladding is quoted separately. Prices move with access, the condition of what is already there, how much structural work is involved and the level of finish you choose. We confirm all of that at the inspection and price your Pimpama job rather than quoting from a range.

Our process

1. 01

   Free consultation

   Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Pimpama.

2. 02

   On-site inspection

   We measure, check the existing structure and services, and identify anything that could affect cost or program.

3. 03

   Fixed-price quote

   You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.

4. 04

   Build

   One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.

5. 05

   Handover

   Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.

Frequently asked questions