Timber Framing in Parkwood

Our timber framing service in Parkwood

Repairs that older homes actually need in Parkwood

Failures in older stock follow a pattern: rot at the base of posts and bearers, split or termite-damaged framing behind wet areas, sagging floors over failed stumps, and cladding that has held water behind unsealed joints. We open up enough to see the real extent before pricing, because a patch over rotten timber fails again within a couple of years. The housing includes 1970s to 1990s low-set brick homes on good-sized blocks, plus newer townhouse developments. Kitchen and bathroom renovations, flooring and internal wall reconfigurations are the most common briefs.

Structural openings and beams

Opening a kitchen into living is the most requested structural change we quote. Done properly it means confirming what the wall carries, an engineer sizing the beam and supports, temporary propping, the beam and posts taken down to adequate footings, and certification at completion - all carried out under our QBCC licence.

Subfloor, bearers, joists and stumps

Older homes commonly hide their worst problems under the floor: sagging bearers, damaged joists, rotted stumps and floors that slope. We inspect, map the damage and replace what needs replacing with treated hardwood or steel before relevelling. On a character home this is almost always the job that has to come before any cosmetic renovation.

Framing for decks, extensions and build-unders

Elevated decks, patios, build-under conversions and new rooms can require engineering, wind-rated details and tie-downs. We frame to the approved drawings and arrange the required inspections so the work can be certified.

What timber framing costs in Parkwood (2026)

Small structural repairs generally start around $3,000-$8,000. Beam installations with engineering and certification typically run $6,000-$20,000, and full subfloor rebuilds or restumping $10,000-$35,000. Prices move with access, the condition of what is already there, how much structural work is involved and the level of finish you choose. We confirm all of that at the inspection and price your Parkwood job rather than quoting from a range.

Our process

1. 01

   Free consultation

   Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Parkwood.

2. 02

   On-site inspection

   We measure, check the existing structure and services, and identify anything that could affect cost or schedule.

3. 03

   Fixed-price quote

   You receive an itemised written quote with inclusions, exclusions and a realistic schedule and clearly identified allowances.

4. 04

   Build

   One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.

5. 05

   Handover

   Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.

Frequently asked questions