Orange Projects - Renovations & Carpentry
Upper Coomera

Timber Framing in Upper Coomera

Structural timber framing - wall, floor and roof framing, load-bearing wall removal and engineered beams, structural openings, subfloor and stump replacement, and termite or rot damaged framing repairs. Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber framing across Upper Coomera and the wider Gold Coast region.

Get a free quote Book a free site visit 0421 326 743

Timber Framing in Upper Coomera - what to expect

Upper Coomera is one of the fastest-growing corridors in South East Queensland, with a big mix of estate ages - some homes are twenty years old, others are barely finished. Volume-built estate homes from the 2000s onward, townhouses and duplexes, plus older acreage-style properties on the hinterland side. Owners commonly upgrade builder-grade kitchens, flooring and joinery. For timber framing specifically, this matters. Builder-grade finishes are the main thing owners want replaced here. Swapping laminate for stone, carpet for hybrid plank and flat-pack cabinetry for custom joinery lifts these homes substantially without structural work. Every Upper Coomera project is quoted at a fixed price after a site inspection, delivered by one licensed team, and finished with the documentation and warranties you should expect from a licensed builder.

Popular in Upper Coomera

Our timber framing service in Upper Coomera

Structural openings and beams

Opening a kitchen into living is the most requested structural change we quote. Done properly it means confirming what the wall carries, an engineer sizing the beam and supports, temporary propping, the beam and posts taken down to adequate footings, and certification at completion - all carried out under our QBCC licence.

Subfloor, bearers, joists and stumps

Older homes commonly hide their worst problems under the floor: sagging bearers, damaged joists, rotted stumps and floors that slope. We inspect, map the damage and replace what needs replacing with treated hardwood or steel before relevelling. On a character home this is almost always the job that has to come before any cosmetic renovation.

Framing for decks, extensions and build-unders

Elevated decks, patios, build-under conversions and new rooms all carry engineering, wind-rating and tie-down requirements in South East Queensland, and coastal areas sit in higher wind regions than inland ones. We frame to the engineered drawings and book frame-stage inspections so certification is straightforward.

What timber framing cost in Upper Coomera (2026)

Small structural repairs generally start around $3,000-$8,000. Beam installations with engineering and certification typically run $6,000-$20,000, and full subfloor rebuilds or restumping $10,000-$35,000. Prices vary with access, existing condition and the level of finish you choose. Builder-grade finishes are the main thing owners want replaced here. Swapping laminate for stone, carpet for hybrid plank and flat-pack cabinetry for custom joinery lifts these homes substantially without structural work.

How long timber framing take

Small structural repairs take 2-5 days. Beam installations usually run 1-2 weeks. Subfloor rebuilds, restumping and build-under framing generally take 3-6 weeks.

Why choose Orange Projects in Upper Coomera

QBCC licensed

You are engaging a licensed Queensland builder in Upper Coomera - QBCC Licence No. 15620733 - not an unlicensed contractor.

Fully insured

Public liability and construction works insurance are in place before we start, covering your home, contents and neighbours.

Fixed-price quotes

We inspect the site, then issue an itemised written quote. What you sign is what you pay unless you request a variation.

One team, start to finish

The same core carpenters run your job from demolition to handover, with one point of contact the whole way through.

Local to South East Queensland

We are based on the Gold Coast and work across Upper Coomera and the surrounding suburbs - no fly-in crews, no unknown subcontractors.

Clear communication

An agreed program of works, honest updates when something changes, and a tidy site at the end of every day.

Our process

  1. 1

    Free consultation

    Tell us what you have in mind. We talk through scope, budget range and timing before anyone visits Upper Coomera.

  2. 2

    On-site inspection

    We measure, check the existing structure and services, and identify anything that could affect cost or program.

  3. 3

    Fixed-price quote

    You receive an itemised written quote with inclusions, exclusions and a realistic program - no vague allowances.

  4. 4

    Build

    One licensed team, scheduled trades, protected work zones and regular updates as the job progresses.

  5. 5

    Handover

    Final clean, defect walk-through, warranty documentation and compliance certificates handed over together.

Suburbs and nearby areas

Frequently asked questions - Upper Coomera

How much does it cost to remove a load-bearing wall?

In Upper Coomera, removing a load-bearing wall and installing an engineered beam typically costs $6,000-$20,000 including engineering, propping, the beam, posts, footings, patching and certification. Long spans, upper-floor loads and steel beams needing craneage sit above that range.

Can you repair termite or rot damaged framing?

Yes, and it is regular work in Upper Coomera. We open up the affected area to find the true extent - almost always larger than what is visible - replace the damaged studs, plates, bearers or joists, address the moisture source, and work alongside a licensed pest manager where termites are involved.

Do you do restumping and subfloor repairs?

Yes. Sagging bearers, borer or termite damaged joists, rotted timber stumps and sloping floors are common in the older cottages and Queenslanders around Upper Coomera. We inspect the subfloor, map the damage, replace with treated hardwood or steel and relevel the floor.

How much do timber framing cost in Upper Coomera?

Small structural repairs generally start around $3,000-$8,000. Beam installations with engineering and certification typically run $6,000-$20,000, and full subfloor rebuilds or restumping $10,000-$35,000. We inspect the property in Upper Coomera before quoting, so the figure you receive is a fixed price for your job rather than a generic range.

Who does timber framing in Upper Coomera?

Orange Projects is a QBCC-licensed builder (Licence No. 15620733) delivering timber framing throughout Upper Coomera and the surrounding Gold Coast area. We are fully insured, quote fixed-price and run each job with one team from start to finish.

How long do timber framing take in Upper Coomera?

Small structural repairs take 2-5 days. Beam installations usually run 1-2 weeks. Subfloor rebuilds, restumping and build-under framing generally take 3-6 weeks.

What makes timber framing different in Upper Coomera?

Volume-built estate homes from the 2000s onward, townhouses and duplexes, plus older acreage-style properties on the hinterland side. Owners commonly upgrade builder-grade kitchens, flooring and joinery. Builder-grade finishes are the main thing owners want replaced here. Swapping laminate for stone, carpet for hybrid plank and flat-pack cabinetry for custom joinery lifts these homes substantially without structural work.

Do I need approval or a licensed builder?

In Queensland, residential building work over $3,300 must be carried out by a QBCC-licensed contractor. Structural work and elevated decks also require engineering and building approval. We arrange the certification and documentation as part of the job.

Do you provide a written fixed-price quote?

Yes. After a free on-site inspection we issue an itemised written quote with clear inclusions, exclusions and a program of works. What you sign is what you pay unless you request a variation.